817-790-9862 M-F 9-5CST
  1. Firefield
  2. Product & Technical Support
  3. RAILS & MOUNTS

Articles in this section

Firefield Rival XL Foregrips Manual (FF35006 & FF35007)

mceclip0.png

ABOUT:

Firefield adds to their line of Rival Foregrips with two new different models; XL M-LOK (FF35006), XL KeyMod (FF35007). Durable and shockproof, the Rival Foregrips are constructed of aluminum with a lightweight skeletonized design. Rival foregrips increase control and accuracy in tactical shooting, combat simulations and home defense.

• Modular design
• Integrated KeyMod mount
• Light weight skeletonized design
• Durable aluminum construction
• Slim ergonomic design
• Modular configurations

 

TECHNICAL SPECIFICATIONS:

mceclip1.png

DIAGRAM:

mceclip2.png

1) Spacer section
2) Hand stop section
3) Angled grip section
4) KeyMod nut
5) KeyMod bolt
6) M-LOK nut
7) M-LOK bolt

mceclip3.png

 

 

MOUNTING:

The Rival XL can be mounted in many different orientations. Some
are shown below.

mceclip4.png

 

TO MOUNT...

FF35006 - M-LOK

1. Loosen the mount by rotating the bolt (7) counterclockwise.
2. Attach the mount to the bottom half of your firearm’s M-LOK rail
by aligning the M-LOK nut (6) in to one of the M-LOK slots.
3. Tighten the bolt clockwise. Determine if the foregrip position is
comfortable and that the firearm feels balanced. If not, remove the
foregrip, reposition and repeat steps 1 to 3.
4. Finally, use the hex key to tighten the mount bolt until it is securely
attached to the firearm. Do not over tighten.

FF35007 - Keymod

Attach the sections from the front most oriented section to the rear
most to allow the KeyMod interface to work without blocking the next
section from being attached.

1. Loosen the mount by rotating the bolt (5) counterclockwise.
2. Attach the mount to the bottom half of your firearm’s KeyMod rail
by aligning the KeyMod nut (4) in to one of the KeyMod slots.
3. Tighten the bolt clockwise. Determine if the foregrip position is
comfortable and that the firearm feels balanced. If not, remove the
foregrip, reposition and repeat steps 1 to 3.
4. Finally, Use the hex key to tighten the mount bolt until it is securely
attached to the firearm. Do not over tighten.

 

MAINTENANCE:

The foregrip may be cleaned using a soft cloth and water or a gun cleaning solvent when exposed to dirt, dust, or other residues.

 

WARNING:

Before handling the foregrip, read and understand the contents of your firearm’s manual, and the Firefield flashlight foregrip manual. Follow all standard safety precautions and procedures during firearm operation, even when the foregrip is not in use. Failure to follow standard firearm safety precautions and procedures, as well as the above warnings, is dangerous and may result in serious injury, damage to property or death.

 

TROUBLESHOOTING:

Proper authorization is required before shipping any product back to Firefield. Failure to obtain authorization could result in your product being returned to the wrong address, lost, or damaged. Firefield is not liable for products returned without authorization.

 

FIREFIELD WARRANTY
Please visit www.fire-field.com for warranty details and information.

If you have any additional questions or concerns, please contact Firefield Technical Support by calling 817.790.9862 or by filling out a Contact Us form here.

 

 

 

 

 

Related articles